Send SMS
Contact Us

Laser Welding Machines PRECILASER

Crane Type Mould Laser Welding Machines

Crane Type Mould Laser Welding Machines

Approx. Rs 5 Lakh / Unit

The Crane type mould laser welding machines are available in two powers 200W and 400W. Precilaser Crane type mould laser welding machines can provide customers with laser processing equipment and processing solution as well for our complete series of laser processing equipment production line.

Advantages:

1. High accuracy , the welding spot diameter is 0.2mm-0.5mm
2. Little affect area , no distortion of the processing parts.
3. No effect for etch after welding , low oxidation rate ,the color of the processing parts is intact .
4. No stomata or sand hole disappeared after welding.
5. Can process at the welding point , especially applicable to repairing mound requiring polishing.
6. The processing parts can reach 50-60 rockwell hardness.

Applicable to material & fields

Repair cracks , collapsed horn , touched edge and damaged sealing side, welding on horniness material (~HRC60)

Technical specifications

Additional Information:

Normal Type Mould Laser Welding Machines

Normal Type Mould Laser Welding Machines

Approx. Rs 5 Lakh / Unit

The Normal Type Mould Laser Welding Machines are available in two powers 200W and 400W. Precilaser Normal type mould laser welding machines can provide customers with laser processing equipment and processing solution as well for our complete series of laser processing equipment production line.

Advantages
1. High accuracy , the welding spot diameter is 0.2mm-0.5mm
2. Little affect area , no distortion of the processing parts.
3. No effect for etch after welding , low oxidation rate ,the color of the processing parts is intact .
4. No stomata or sand hole disappeared after welding.
5. Can process at the welding point , especially applicable to repairing mound requiring polishing.
6. The processing parts can reach 50-60 rockwell hardness.

Applicable to material & fields
Repair cracks , collapsed horn , touched edge and damaged sealing side, welding on horniness material (~HRC60)

Technical specifications
ModelML-200W / 400W
Average laser power200W / 400W
Max laser power240W / 440w
Max energy of single pulse75J / 120J
Laser wavelength1064nm
Pulse width0-20ms
Laser welding frequency0.5 -100HZ
Spot size range0.2-2mm
Welding wire0.1-0.8mm
Power Supply380VAC ± 10% / 50-60HZ
Power Consumption≤ 6 KW / 12KW
Water pressure protection≤ 0.025MPa
Cooling water temperature≤ 35 degrees
Temperature protection45 degrees
Cooling water flow10L/min
Dimensional1000mm x 600mm x 1500mm
Weight≤300kg
Cooling WayWater cooling
Laser TypePulse

Additional Information:

Jewellery Laser Welding Machines

Jewellery Laser Welding Machines

Approx. Rs 3 Lakh / Unit

The Jewellery laser welding machines are available in two powers 200W and 400W. Precilaser Jewelry laser welding machines can provide customers with laser processing equipment and processing solution as well for our complete series of laser processing equipment production line.

Advantages

1. Energy, pulse width, frequency and facula can be adjusted within a wide range to achieve different welding effects. Parameters are adjusted by the control rod in the sealed cavity, simple and efficient.
2. Ceramic focusing cavity imported from the U.K. is employed, corrosion resistant, high temperature resistant, efficient in electrical / optical conversion.
3. The focusing cavity's service life is 8 to 10 years, and the service life of the xenon lamp is over 8 million times.
4. World-leading automatic light shielding system is employed to remove stimulation of light on eyes during operation.
5. 24-hour continuous operation, with stable operating performance, and free from maintenance within 10000 hours.
6. Personalized design in compliance with ergonomics principles.
Applicable to material & fields
perforation and spot welding of sand hole for gold and silver jewelries, gold and silver jewelries processing, and welding of small-sized parts.

Technical specifications


Additional Information:
X
Provide Us More Details
Is this Requirement:

One Time Regular

How soon do you want this:

Immediate After 1 month

Purpose of Requirement:

Reselling End Use Raw Material

X

Looking for Laser Welding Machines PRECILASER ?

    country-ico

    We will contact you soon !

    S. Vyas

    (Executive Manager)

    Associated Technocrats Private Limited

    Sector - 64, Noida, Uttar Pradesh, India

    More Categories

    View All Categories »
    Send SMS
    Contact Us